Home>Products>Bearing Slewing Ring>75014A Franke Slewing Ring Bearings
75014A Franke Slewing Ring Bearings
category
Bearing Slewing Ring
Franke 75014A Bearing SPECIFICATIONS
With over 10170 Taizhou Fixing Pump Co., Ltd. full-service stores, our 75014A Franke Slewing Ring Bearings inventory is extensive and 21 mm B our 12 mm b parts are priced right. within 24 hours. This helps you maximize your 5 mm h productivity by saving time and your hard-earned dollars.
- Franke
75014A
- 21 mm
- 5 mm
- 12 mm
- 145 mm
- 285 kN
- M 130x2
- 0.8 kg
- 155 mm
- Taizhou Fixing Pump Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Specifications for Bearing Slewing Ring
- 21 mm
- 5 mm
- 12 mm
- 145 mm
- 285 kN
- M 130x2
- 0.8 kg
- 155 mm
- TMFN 23-30
Franke 75014A 75014A Franke Slewing Ring Bearings Technology
No. | Brand | H | K | h | U | R | s | A | E |
73009L | Franke | - | - | - | - | - | - | - | - |
2 1565 02 | Rollix | - | - | - | - | - | - | - | - |
73089L | Franke | 93.5 mm | - | - | - | - | - | - | - |
7 1830 04 | Rollix | - | - | - | - | - | - | - | - |
2 1295 | Rollix | - | - | 76.5 mm | - | - | - | - | - |
36 0941 01 | Rollix | - | - | - | - | - | - | - | - |
68476A | Franke | - | - | - | - | - | - | - | - |
29 1091 01 | Rollix | - | - | - | - | - | 5 mm | - | mm |
75032A | Franke | - | - | - | - | - | - | - | - |
75077A | Franke | - | - | - | - | - | - | - | - |
73034L | Franke | - | - | - | - | - | - | - | - |
73069L | Franke | 360.363 mm | - | - | - | - | - | - | - |
66167L | Franke | 196.85 mm | - | 38.1 mm | - | - | - | - | - |
66152L | Franke | - | - | - | - | - | - | - | - |
1 1845 02 | Rollix | - | - | - | - | - | - | - | - |
75040A | Franke | - | - | - | - | - | - | - | - |
73028L | Franke | - | - | - | - | - | - | - | - |
6 1595 04 | Rollix | - | - | - | - | - | - | - | - |
28 1091 01 | Rollix | - | - | 142 mm | - | - | - | - | - |
75063A | Franke | - | - | - | - | - | - | - | - |
2 204 | Rollix | - | - | - | - | - | - | - | - |
73075L | Franke | - | - | - | - | - | - | - | - |
73065L | Franke | - | - | - | - | - | - | - | - |
73124L | Franke | - | - | - | - | - | - | - | - |
73045L | Franke | 209.55 mm | - | 42.862 mm | - | - | - | - | - |
73131L | Franke | - | - | - | - | - | - | - | - |
73033L Franke Slewing Ring Bearings | Bearing (basic designation):23060 K; P0°:4000 kN; ba min.:118 mm; P55°:5000 kN; Q120°:2860 kN; P120°:1800 kN; Q180°:1430 kN; Q150°:1650 kN; Locating ring:2 x FRB 25/460; N4 max.:20 mm; bc:154.5 mm; A:315 mm; Mass housing:252 kg; da:280 mm; A1:280 mm; P180°:2000 kN; L:790 mm; H:551 mm; N:50 mm; ba max.:149 mm; |
2 256 Rollix Slewing Ring Bearings | Housing:FSNL 522-619 RU; J:350 mm; H1:125 mm; N1:18 mm; J1:70 mm; H2:45 mm; Pa:220 kN; Oil seal:2 x TSN 619 U; Appropriate attachment bolt, rec. tightening torque:200 N·m; H:242 mm; P90°:410 kN; Q180°:310 kN; Cap bolt, size:M 20x100; P0°:600 kN; N4 max.:8 mm; A2:195 mm; Ca:80 mm; P120°:310 kN; End cover:ASNH 522-619 R; N:24 mm; |
7 24 Rollix Slewing Ring Bearings | Cap bolt, SAE grade:8; R2:27.94 mm; End plug (suffix Y):EPR 7; Ca:64.795 mm; P90°:72.5 kN; R1:60.325 mm; N1:22.225 mm; H2:41.275 mm; Stabilizing ring:SR-18-15; Labyrinth ring:2 x LOR 36; Cap bolt:2 x 5/8-11 UNC; Bearing limiting speed:4300 r/min; Appropriate attachment bolt size G:0.75 in; P180°:49.8 kN; Mass pillow block:24.3 kg; P150°:40.5 kN; P60°:121 kN; S:4.763 mm; Housing:SAF 615; |
66161L Franke Slewing Ring Bearings | Stabilizing ring:SR-20-17; Cap bolt:2 x 3/4-10 UNC; P150°:40 kN; Max. speed for Taconite seal:900 r/min; P120°:44.5 kN; PG:1/4 NPT; Initial grease fill:181.44 g; Cap bolt, SAE grade:8; L:387.35 mm; R1:65.088 mm; da:88.9 mm; End plug (suffix Y):EPR 12; Ca:70.104 mm; h:42.069 mm; N1:22.225 mm; A2:222.25 mm; S:4.763 mm; Pa:18.1 kN; J min.:295.275 mm; H2:44.45 mm; |
66157L Franke Slewing Ring Bearings | Attainable speed:5300 r/min; Da max.:53 mm; b:4.2 mm; Preload:2250 N; da min.:40 mm; d:30 mm; D2:53.2 mm; Fatigue load limit Pu:2.6 kN; H:28 mm; r3,4 min.:0.6 mm; ra max.:0.3 mm; D:62 mm; d2:42.3 mm; Mass bearing:0.41 kg; r1,2 min.:0.3 mm; rb max.:0.6 mm; Static moment stiffness:290 N·m/mrad; Basic static load rating C0:69.5 kN; K:3 mm; a:90 mm; |
39 0941 01 Rollix Slewing Ring Bearings | PosiTrac Plus contact element:2 x B10724-113; Cap bolt, SAE grade:5; H1:160.325 mm; P90°:138 kN; h:60.325 mm; Stabilizing ring:SR-0-24; P150°:80.1 kN; Initial grease fill:623.7 g; Max. speed for PosiTrac Plus seal:1350 r/min; Da:259.999 mm; J1:95.25 mm; J max.:463.55 mm; PG:1/4 NPT; RG:3/4 NPT; Ca:95.809 mm; Cap bolt:4 x 3/4-10 UNC; A2:215.9 mm; Labyrinth ring:2 x LOR 111; ba:67.469 mm; H2:63.5 mm; |
75059A Franke Slewing Ring Bearings | Type:300-RDM Series (from; Basic Radial Load Rating-Dynamic DC:255000 N; d:110.000 mm; Fillet Radius rb:1.00 mm; B:50.00 mm; D:240.0000 mm; Speed Rating-Open and Shielded-Oil OSO:9000 rpm; Fillet Radius ra:2.50 mm; Speed Rating-Open and Shielded-Grease OSG:6000 rpm; Basic Radial Load Rating-Static SCO:255000 N; |
6 1390 03 Rollix Slewing Ring Bearings | Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; B:200 mm; D:230 mm; a:10 mm; Mass bushing:12.2 kg; h:212.5 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Tolerance housing:H7; d:210 mm; |
1 213 Rollix Slewing Ring Bearings | d:90.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:143000 N; Sealed Speed Rating n3:2400 rpm; B:43.00 mm; D:190.0000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:108000 N; Accessories:Shield & Seal; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3400 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; |
73004L Franke Slewing Ring Bearings | B:22.20 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:21200 N; Sealed Speed Rating n3:8000 rpm; Grease Speed Rating n1:8000 rpm; Fillet Radius ra:1.00 mm; d:25.000 mm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:22900 N; Accessories:One Seal; |
73124L Franke Slewing Ring Bearings | Recommended tightening torque for grub screw:6.5 N·m; Fatigue load limit Pu:0.475 kN; d1 ≈:39.7 mm; d2:44.1 mm; B1:35.7 mm; Hexagonal key size for grub screw N:3.969 mm; C:18 mm; B4:5.95 mm; d:26.988 mm; s1:26.7 mm; Basic static load rating C0:11.2 kN; D:62 mm; Calculation factor f0:14; B:23.8 mm; Limiting speed1):6300 r/min; Mass complete bearing:0.36 kg; Basic dynamic load rating C:19.5 kN; |
73053L Franke Slewing Ring Bearings | G:M 30x2; dk:40.7 mm; d:30 mm; Mass rod end:0.9 kg; r1 min.:0.6 mm; C1 max.:20 mm; α:6 °; d2 max.:75 mm; Basic dynamic load rating C:93 kN; h:110 mm; Specific dynamic load factor K:150 N/mm²; l1 min.:65 mm; Material constant KM:330; l2 max.:149 mm; B:22 mm; Basic static load rating C0:81.5 kN; l7 min.:34 mm; |
75081A Franke Slewing Ring Bearings | G:M 45x3; h1:165 mm; l5 ≈:30 mm; l4 max.:219 mm; w:55 mm; d2 max.:104 mm; Basic dynamic load rating C:360 kN; B:32 mm; r1 min.:0.6 mm; d:45 mm; l3 min.:65 mm; C1 max.:28 mm; l7 min.:55 mm; Specific dynamic load factor K:300 N/mm²; α:7 °; d4 ≈:65 mm; dk:60 mm; Mass rod end:3.2 kg; Basic static load rating C0:224 kN; |
73029L Franke Slewing Ring Bearings | Effective load carrying cross section A:30260 mm²; Mass bushing:1.9 kg; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:h8; B:180 mm; D:190 mm; Tolerance housing:H7; Specific static load factor K0:200 N/mm²; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.08; d:170 mm; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:140 N/mm²; |
73046L Franke Slewing Ring Bearings | Reference speed:1200 r/min; ra max.:4 mm; d:280 mm; s max.:6.3 mm; Limiting speed:1500 r/min; r3,4 min.:5 mm; B:180 mm; Mass bearing:120 kg; K:7.5 mm; da min.:300 mm; F:326 mm; Calculation factor kr:0.34; Fatigue load limit Pu:440 kN; r1,2 min.:5 mm; Basic dynamic load rating C:2550 kN; Design variant/feature:NNU/W33; rb max.:4 mm; D1 ≈:407 mm; b:13.9 mm; D:460 mm; |
37 1091 01 Rollix Slewing Ring Bearings | d:60.000 mm; B:57.20 mm; Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:95000 N; D:130.0000 mm; Basic Dynamic Radial Load Rating C:121000 N; Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields & Snap-R; |
75014A Franke Slewing Ring Bearings Video
Franke 75014A INTERCHANGE
Bearing Slewing Ring Part series 75014A is a potential replacement for these common bearing part numbers:
75014A
75014A
75014A
75014A
75014A
75014A
75014A
75014A
Contact Us
- Taizhou Fixing Pump Co., Ltd.
- Address498 Feague Court, Duburn, AL 39646, U.S.A.
- Phone(Working Time)+1-598-289-5884
- Fax
Bearing Slewing Ring CATEGORIES
- Atos Pump
- Daikin Pump
- Parker Pump
- Rexroth Pump
- Toko Pump
- Vickers Pump
- Yuken Pump
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings
- Super Precision Angular Contact Bearings
- Super Precision Bearing
- Slewing Ring
- Tapered Roller Bearing Assembly
- Four-Row Tapered Roller Bearing
- Spherical Roller Bearings
- Cylindrical Roller Bearings
- Double Row Tapered Thrust Roller Bearings
- Railway Rolling Spherical Roller Bearings